Home / Blog / Tools for cutting artificial turf and how to do it

Tools for cutting artificial turf and how to do it

cortar cesped artificial


When talking about how to cut the artificial turf, obviously, we do not talk about how to prune it, as this is only necessary with the natural turf. We refer to solving the possible doubts when it is not clear which is the ideal cut at the time of installation.

It is very important to keep in mind that the necessary cuts in the lawn must have the proper shape. In addition, close attention should be paid to badly-given cuts, which often also result in incorrect measurements.

How should the correct cut be?

You should know that you have to make the cut always before the installation of the lawn. This means that you can not first install, paste and, later, decide to proceed to cut the leftover.

When installing the lawn, it is ideal to measure well the surface on which you want to place. It would be appropriate to have a uniform ground with well defined mesures.

First of all, get excited and start working with enthusiasm. We will consider the measures as a first step. Although it is something that is obvious, many people overlook the proportions. Once the measures are known, the grass will be cut and installed. The measurements have to be taken accurately. In this way, you will know how much is needed.

Secondly, we will proceed to purchase the lawn. You will buy the footage that is needed, of course, but it is advisable to acquire a little more.

Thirdly, the lawn will be placed on the surface. You should extend it. This is because, although installation at this point is like a kind of mold, some circumstances, for example, a drain hole, must be keep in mind. It will be there where you also have to cut, and not only at the ends.

Then you have to measure and point. The measurements should be marked well on the back of the lawn, not on the green part. Then you are ready to cut, which will be the next step. It will be cut by pieces to go installing. It is important we have our time: if done in a hurry the work could go to waste.

Tools needed

Tools for cutting artificial turf can be very useful. The cut will be done on the back because there are no fibers and the cut is easier than perfect. For this, we can use large scissors, although the ideal is to use an industrial cutter, with the blades in proportion to the thickness of the turf.

This kind of cutter can cut in a very simple way. At the same time, cutting can be done as quickly as possible.

With respect to the tools, it is basic that they are in good state of conservation. An oxidized cutter, for example, is very likely to result in poor workmanship.

Tips for cutting artificial turf

The use of gloves is recommended. Garden gloves can be very useful. This way, you will avoid cuts in the hands, due to lack of concentration or any other accident.

Throughout the process, it will be kept in mind that the strokes must be precise. Everything will depend on the quality of the strokes that are made. To this end, the measurements must be of the highest accuracy and performed without any rush. That way, everything will fit and the result will be fantastic. As better you work, your grass will look better.


  • Realturf

    En Realturf llevamos desde 2002, ayudando a miles y miles de clientes a crear su lugar favorito. Contamos con profesionales cerca de ti que estarán encantados de asesorarte y resolver todas tus dudas.